You are here

How to Troubleshoot Canon Printer Error 6800

Canon printers are among the most sophisticated printers in the world because they are designed specifically to meet the needs of the consumer. Canon printers are available in a variety of models, each with its own set of unique features and capabilities. Despite the ease of use of Canon printers, errors do occur on occasion, preventing you from completing your printing tasks. Canon Printer Error Code 6800 is one such issue that interferes with your work because it prevents you from printing new documents. This blog describes the steps you can take to Canon Printer Error Code 6800 Solution and continue using the printer. If you do not understand any of the procedures listed below, you can call the Canon Printer support number for additional assistance because it is impossible to provide thorough troubleshooting methods in this blog in this manner.

What is the source of Canon Printer Error Code 6800?
The hardware Canon 6800 error for the Canon printer indicates a problem with one of the printer's components. Knowing what's causing the Canon Printer problem can help you figure out the best way to fix it. Some of the causes of Canon Printer Error 6800 are as follows:

  • The feed tray of the printer cannot be opened because it is jammed. This obstruction is caused by a buildup of paper or dust fragments.
  • Incorrect installation of the paper tray when the printer was first set up can also result in Canon Printer Error Code 6800.
  • Users will occasionally issue multiple print commands to speed up printing. Despite this, the various commands can lead to errors.
  • The line feed may be marred or scraped, or there may be a flaw in the printer's sensor unit that contributed to the error.

How to Resolve Canon Printer Error 6800
The best and safest way to resolve 6800 error canon Printer issues is to restart or reset your Canon printer. The steps outlined below will assist you in resetting the printer and resolving the issue:

  • Unplug your Canon printer from the power supply and leave it inactive for a few minutes.
  • Reattach the printer's power cable gently, plug it in, and turn the printer on.
  • Hold down the printer's power button for a few seconds before pressing the "Stop" button twice.
  • Release the power button two times during this process. After releasing the power button, press the "Stop" button four times.

After you've reset the printer, print a test page. If the problem persists, contact Canon Printer support to see if there are any other troubleshooting steps you can take. If the preceding procedure is successful, the error message can be easily resolved Canon Printer Error Code 6800. If the problem persists, try the following steps: -
Step 1: Ensure that the printer is "Powered On."
Step 2: Remove the printer's paper output tray.
Step 3: After that, open the printer's top cover and wait for the print head to move to the centre.
Step 4: Try to open the printer's internal cover.
Step 5: Check to see if the ink tanks are properly filled.
Step 6: If necessary, reposition the ink on the printer.
Step 7: Press the bottom of each ink tank until you hear the printer click.
Step 8: Attach the top and inner covers to the printer.
Step 9: If the printer's reset technique still does not work, you will need to change or replace the new logic board in order to continue using the printer.

Concerning Canon Printer Assistance
If the solutions listed above fail to resolve the printer error, you still have the option of contacting Canon Printer customer service. Canon's specialists and technicians are available around the clock to assist you with any problems or errors with their products. You can contact Canon Printer Support with a single phone call. For immediate assistance, call Canon Printer customer service at their toll-free number.

References: Canon Printer Error 6800