You are here

valvepipe's blog

In fact, too tight moving ring seals are harmful

Submitted by valvepipe on Thu, 06/18/2020 - 01:58

(6) When the transmission tape is not in use, the tape should be removed, washed with warm water and dried, and stored in a place without direct sunlight, and should not be stored in a place with oil stains, corrosives and smoke. As another example, if the pump is found to be violently vibrating, it should be stopped immediately to check, otherwise, if the pump is bent and deformed, a safety accident is likely to occur. On the contrary, moderate locking of the lock nut will ensure that the inter-shaft pad will always maintain a certain compression elasticity.

The external interference signal is too large

Submitted by valvepipe on Thu, 06/04/2020 - 18:29

The wave guide wire inside the liquid level meter is faulty, such as looseness, poor sealing Water corrosion, etc. Incorrect installation of the wave guide wire and distortion of signal transmission;    4.. The following Mingyu automatic control will introduce the liquid level of the magnetic flap Analysis of the cause of the false liquid level in the meter?    1. The liquid level gauge has a simple structure, intuitive and clear observation, no blockage or leakage, easy installation and simple maintenance.

Subscribe to RSS - valvepipe's blog