Are you living in Melbourne city and worried about your high-water bill? If Yes, there are very high chances of Water Leak which is causing an increment in your water bill. To avoid, extra billing, Water leak detection is very important, because if you don't perform the water leak detection process, you can't treat the causes of water leaks. In this article, we are going to discuss with you some of the major reasons for water leaks in your home, how to detect them and prevent them.
Some common causes of Water leak and their detection
Washing Machine:
In Melbourne, the highest usage of water is through Washing Machine. There are likely chances of Water leak from the Washing machine due to rupturing of hot or cold-water supply. The water supply hose of the washing machine is made of black rubber or polymer which can damage from the heat of hot water. For this reason, water leaks caused by the Washing machine can contribute to your high-water billing.
Leak Detection:
Check the main water inlet by removing the main top of the cabinet. Inspect the hose of the Washing machine for signs of cracking or abrasion. Checking the surface behind your washing machine for wet spots is another good way to leak detection.
Toilet Pipes:
Toilet pipes can be a major reason for water leaks. These pipes are running behind the walls of the Toilet and when burst or leak, causes a huge amount of water leakage. Apart from these pipes, water supply or tank could be the main source of water leakage.
Leak Detection:
Water Leak detection from toilet pipes is very easy. You just have to look at the walls of your toiles behind which the water pipes are running. If there are any wet spots or moisture in the walls, it is a prove of Toilet pipes water leak.
Sinks and Showers
The water leak in sinks and showers is very difficult to detect because the main connection of showers and sinks are hidden behind the tiles in the walls. Any pressure on the connection sites of sinks and showers can cause damages and hence water leak.
Leak detection:
Search for puddles of water in the areas near sinks and showers. The lifting up of tiles near the wall areas of sinks and showers could be a big sign of a Water leak.
Water Heaters
Water Leak in Water heaters is mostly due to the expired life of water heaters. The tank or pipe deterioration of the water heater can lead to a water leak. Rust and corrosion are two main factors that are responsible for water tank deterioration in water heaters.
Leak detection:
Inspection of anode rod of water heater is one of the best ways of water leak detection. You can check the source of the water leak by removing the drain pipe and observing the hissing of sound. Puddles underneath the tank are also the signs of a water leak.
High Water Pressure
High water pressure is sometimes the mother of water leaks. Normally the pressure is utilized for an efficient supply of water but when this pressure exceeds its limit (more than 40-60 p.s.i), it can produce stress in your water pipes, fixtures, and home appliances. Sometimes, the water pipes could burst as a result of this stress and cause a huge water leak while small scale water leak in home appliances like Washing Machine.
Leak Detection:
Regularly check the pinholes and or any drips in the pipes and home appliances. You can use a Water Pressure gauge for measuring the water pressure. You can check the water pressure by turning it on and see if it is blasting out or landing calmly.
How to prevent Water Leak?
It is highly recommended that you should check your water supply, pipes, and home appliances regularly. Replace worn-out pipes or deteriorated water tanks and tubs and notice the decrease in your monthly water bill. Water leak detectors are also available in the market which can detect even small droplets of water near everything. Use these water leak detectors will surely help in preventing major sources of water leaks in your home.
Thank You Very much for reading this article