You are here

almetals's blog

8011,8021,8079 aluminum foil which one is more suitable for pharmaceutical packaging?

Submitted by almetals on Wed, 07/12/2023 - 00:36

Among the three options you mentioned, 8079 aluminum foil is commonly used for pharmaceutical packaging due to its specific properties and characteristics. Here's why:

Purity and Cleanliness: 8079 aluminum foilis made from high-purity aluminum, ensuring its cleanliness and minimizing the risk of contamination. This is crucial for pharmaceutical packaging, where hygiene and product safety are of utmost importance.

How much is an aluminum sheet 5mm?

Submitted by almetals on Thu, 12/29/2022 - 00:26

To understand the price of 5mm aluminum sheet, you must first know the processing process of aluminum veneer. Aluminum veneer has two kinds of fluorocarbon spraying aluminum veneer and roller coating. Fluorocarbon spraying is the most commonly used process for domestic aluminum veneer processing. Spraying production Aluminum veneer is divided into two steps: sheet metal processing.

What does AL1050 mean?

Submitted by almetals on Sat, 11/26/2022 - 02:29

The aluminum plate model AA1050 is the 1050 aluminum plate that meets the Alcoa standard.
AA is the English full name ALUMINUM
The abbreviation of ASSOCIATION is the abbreviation of Aluminum Association of America. AA is only crowned in front of the deformed aluminum alloy grade. It means that the grade is produced and inspected according to Alcoa standards.

Application and characteristics of 5052 aluminum plate

Submitted by almetals on Fri, 10/14/2022 - 01:17

5052 aluminum sheet belongs to Al-Mg alloy, which is widely used, especially the construction industry cannot do without this alloy. It is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and moderate strength. The main alloying element of 5052 is magnesium, which has good formability, corrosion resistance, weldability, and medium strength. Hardware products, electrical-apparatus shells, etc.

Application and characteristics of 5052 aluminum plate

Submitted by almetals on Thu, 10/13/2022 - 00:38

5052 aluminum sheet belongs to Al-Mg alloy, which is widely used, especially the construction industry cannot do without this alloy. It is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and moderate strength. The main alloying element of 5052 is magnesium, which has good formability, corrosion resistance, weldability, and medium strength. Hardware products, electrical-apparatus shells, etc.

1-8 series aluminum plate performance comparison

Submitted by almetals on Wed, 09/21/2022 - 01:01

In the process of aluminum sheet processing, various alloying elements are added to achieve some special mechanical properties of the <><>aluminum sheet.
The 8 series are 1-8 series respectively. For example, 2A21 belongs to 2 series, 3003 belongs to 3 series, 5052 belongs to 5 series and so on.

The 1000 series are pure aluminum plates, such as _1060. The main component of this type of aluminum plate is aluminum. above 99%

What is aluminum trim coil?

Submitted by almetals on Tue, 09/06/2022 - 02:09

Used to cover exposed wood trim in your home, a trim coil is a thin piece of aluminum, usually covered with a polyester coating. It will protect the wood underneath by preventing heat and moisture from damaging the wood fibers in the trim. Coil stock is virtually maintenance free, manufactured to be naturally scratch resistant and requires only occasional washing with water and soap. This makes it a great finish choice for your customers.

Eight characteristics of 1000 series aluminum plate

Submitted by almetals on Mon, 08/29/2022 - 01:56

1. The density is low. The specific gravity of pure aluminum is 2.71. Under the same volume, the weight of the 1-series aluminum plate is only 35% of that of iron.
2. The 1000 series aluminum sheet can be strengthened, and the strength of the 1 series aluminum sheet can be increased by cold working, up to more than 1 times.
3. Easy to process, 1 series aluminum plate has good plasticity and is more suitable for machining, such as sawing, shearing, milling, boring, planing, turning, etc.

The difference between thin aluminum plate and die-casting aluminum plate

Submitted by almetals on Wed, 08/24/2022 - 01:57

1.The main differences between the two are: 1. Die-cast aluminum products have complex shapes and can be cast into any shape. Thin aluminum products have a uniform section (sawed from any section, the section is the same), such as: pen tube, power bank shell, servo motor shell and so on.

Characteristics and application of 6082 alloy aluminum plate

Submitted by almetals on Thu, 08/18/2022 - 22:53

1.6082 aluminum plate has good formability and weldability.
2.6082 aluminum sheet has high strength and good metal properties.
3.6082 aluminum sheet has good usability and interface characteristics.
4.6082 alloy aluminum plate is easy to process and easy to coat.
5. Good corrosion resistance and oxidation resistance.

Pages

Subscribe to RSS - almetals's blog