You are here

Global Automotive Crankshaft Market is expected to surge a value of USD 5.6 Bn in 2033 at a CAGR of 3.2%.

Submitted by Ajay@12345 on Thu, 10/03/2024 - 21:33

Global Automotive Crankshaft Market Analysis

Market Overview

The Global Automotive Crankshaft Market has been experiencing notable growth in recent years. As of 2024, the market was valued at USD 4.2 billion, and it is projected to reach USD 5.6 billion by 2033, growing at a compound annual growth rate (CAGR) of 3.2%. This growth trajectory reflects a variety of factors, including technological advancements, increased demand for fuel-efficient vehicles, and the rising need for enhanced engine performance.

Global Automotive Crankshaft Market Growth Analysis

The automotive crankshaft market is set for moderate expansion, primarily driven by advancements in engine technology. With an increasing desire for fuel-efficient and high-performance cars, crankshafts play an essential role in optimizing engine efficiency while reducing emissions. Manufacturers are leveraging breakthrough materials such as lightweight alloys and improved forging techniques to meet stringent fuel efficiency and emissions regulations.

However, the market faces potential challenges from the ongoing shift towards electric vehicles (EVs), which do not utilize traditional crankshafts. This trend could impede market expansion, especially in regions like Europe and North America, where EV adoption is more advanced. Nevertheless, internal combustion engines are expected to remain the dominant technology in developing markets that lack sufficient EV infrastructure. Additionally, aftermarket opportunities are emerging, driven by the rising demand for replacement crankshafts as vehicle longevity increases and the used car market expands.

Key players in the market must focus on enhancing research and development (R&D) investments to refine product design and production efficiencies. Forming strategic alliances between original equipment manufacturers (OEMs) and material suppliers can lead to developing solutions that meet evolving regulatory requirements and performance expectations. While the long-term implications of electric vehicle sales may pose challenges, the growth prospects for the Global Automotive Crankshaft Market appear positive, particularly in emerging economies.

Get a Free PDF Sample Copy of this report Here Only@ https://dimensionmarketresearch.com/report/automotive-crankshaft-market/request-sample

Key Takeaways

The Global Automotive Crankshaft Market is expected to reach USD 5.56 billion by 2033 at a CAGR of 3.1%.

Asia Pacific dominates the market, accounting for a 40.2% share, due to strong automotive manufacturing activity and rising vehicle demand.

Lightweight materials such as high-strength steel and aluminum are fostering innovations in crankshaft production for improved fuel efficiency.

Passenger vehicles lead the automotive crankshaft market, driven by global demand for more efficient engines.

Technological innovations, including sensor integration and production automation, are enhancing crankshaft efficiency and reducing costs.

Use Cases of Automotive Crankshafts

Passenger Vehicles

Crankshafts are integral components in gas-powered passenger cars, converting linear piston motion into rotational motion. As emission regulations tighten, lightweight yet durable crankshafts made from advanced materials, such as high-strength steel or aluminum alloy, are increasingly utilized to enhance performance and meet environmental requirements.

Commercial Vehicles

Heavy-duty trucks and buses place significant mechanical stress on crankshafts. By employing forged steel crankshafts, commercial vehicles can ensure durability and longevity, enabling engines to handle greater torque levels during extended use. This is crucial in the transportation and logistics sectors, where reliability is paramount.

Hybrid Vehicles

Hybrid vehicles, which utilize both electric power and internal combustion engines, require high-performance crankshafts to manage power and torque from both sources. Precision engineering is essential to balance efficiency with performance in these vehicles.

Motorsports and High-Performance Vehicles

In motorsports and high-performance vehicles, crankshafts are designed to withstand intense RPMs and mechanical stress. Typically custom-built from billet materials, these crankshafts maximize strength while minimizing weight, contributing to faster acceleration and optimized engine output crucial for competitive racing.

Aftermarket and Replacement Parts

The aftermarket for automotive crankshafts is substantial, particularly in regions with long vehicle lifespans and vibrant secondhand markets. High-quality replacement crankshafts for older vehicles can extend their lifespan, appealing to cost-sensitive consumers who prefer repairs over new purchases.

Research Scope and Analysis

By Material

By 2023, forged steel emerged as the dominant material in the automotive crankshaft market, holding over 42.0% market share. Its superior strength, durability, and fatigue resistance make it ideal for high-performance heavy-duty applications, such as commercial vehicles. Cast iron/steel crankshafts also maintain strong market shares due to their cost-effectiveness and widespread use in mass-market vehicles.

Machined billet crankshafts, while representing a smaller market share, are gaining traction in niche applications, particularly in high-performance and luxury vehicles. Their custom engineering features cater to performance-oriented engines, although high production costs limit broader adoption.

By Type

In 2023, flat plane crankshafts dominated the market, accounting for over 67.8% of the share. Their popularity stems from their use in high-performance and sports vehicles, offering faster acceleration and reduced engine weight. Cross-plane crankshafts, while capturing a smaller share, are favored for larger engines, providing superior balance and smooth operation.

By Vehicle Type

Passenger cars represented the leading segment in the automotive crankshaft market in 2023, comprising over 61.67% of the market share. This dominance is attributed to growing consumer preferences for lightweight, fuel-efficient vehicles, especially in regions like Asia-Pacific and Europe. The advancements in crankshaft materials and technologies further support this trend.

Commercial vehicles play a vital role in the market, with increasing demand driven by global trade and e-commerce. The demand for reliable crankshafts within this segment is expected to grow, particularly as electrification in commercial vehicles lags behind that in passenger cars.

Global Automotive Crankshaft Market Regional Analysis

Asia-Pacific

Asia Pacific emerged as the dominant region in the global automotive crankshaft market in 2023, holding over 40.2% market share. The region's automotive industry, particularly in countries like China, India, and Japan, is characterized by major production facilities for both passenger and commercial vehicles. The rising middle-class population and urbanization rates contribute to increased vehicle sales, further bolstering the region's market dominance.

North America

North America boasts a significant share of the crankshaft market due to the presence of major automotive manufacturers and a robust aftermarket sector. In the U.S., the demand for high-performance crankshafts remains strong, driven by emissions-reduction initiatives and increasing performance standards.

Europe

Europe is marked by stringent environmental regulations and leading automotive OEMs, which demand lightweight yet fuel-efficient crankshafts. Although the shift toward electrification presents challenges, hybrid vehicles continue to drive short to medium-term demand.

Latin America and Middle East/Africa

While Latin America and the Middle East/Africa hold smaller shares of the global market, they are witnessing steady expansion. Increasing vehicle ownership rates and infrastructure development initiatives are boosting demand in these regions.

Competitive Landscape

In 2023, key players in the global automotive crankshaft market are shaping industry dynamics through innovation and strategic collaborations. Companies such as Maschinenfabrik ALFING Kessler and TIANRUN CRANKSHAFT are leading the way by focusing on precision engineering to produce high-performance crankshafts.

Thyssenkrupp and Rheinmetall stand out due to their advancements in lightweight materials, allowing them to meet stringent fuel efficiency and emissions regulations. Bharat Forge is expanding globally, driven by demand from emerging markets, while North American players like NSI Crankshaft Company and Kellogg Crankshaft Company maintain a strong foothold through durable, high-quality products.

Recent Developments

Several recent developments highlight the dynamic nature of the Global Automotive Crankshaft Market:

Bharat Forge announced the acquisition of a business worth Rs 850 crore in the automotive and industrial services sector, aimed at enhancing its capabilities.

ThyssenKrupp Crankshaft Company LLC is expanding its Material Services across North America, with plans to open a new facility in San Luis Potosi, Mexico, investing USD 37 million.

MM Forging has initiated a merger with Cafoma Autoparts Private Limited to enhance operational synergies and streamline activities across its entities.

Guangxi Yuchai Machinery Group Co. Ltd has commenced manufacturing a specialized crankshaft requested by Audi AG, showcasing its commitment to R&D and premium automotive manufacturing.

FAQs

What is a crankshaft, and why is it important?

A crankshaft is a critical component of an internal combustion engine, converting the linear motion of the pistons into rotational motion, which powers the vehicle. Its design and materials significantly influence engine performance, efficiency, and emissions.

What are the main materials used in crankshaft manufacturing?

The primary materials used in crankshaft manufacturing include forged steel, cast iron/steel, and machined billet. Each material offers different advantages in terms of strength, durability, and cost-effectiveness.

How is the shift to electric vehicles impacting the crankshaft market?

The shift to electric vehicles poses a challenge to the crankshaft market, as EVs do not utilize traditional crankshafts. However, in regions with less developed EV infrastructure, internal combustion engines will continue to dominate, supporting ongoing demand for crankshafts.

Which regions are leading in the automotive crankshaft market?

Asia Pacific is currently the leading region in the automotive crankshaft market, driven by strong automotive manufacturing activity and rising vehicle demand. North America and Europe also hold significant shares due to established automotive industries and robust aftermarket sectors.

What trends are shaping the future of the automotive crankshaft market?

Key trends include advancements in materials technology, the growing demand for lightweight and fuel-efficient vehicles, and increased aftermarket demand for replacement parts. Additionally, strategic collaborations between OEMs and suppliers are expected to enhance product development and meet regulatory requirements.

Conclusion

The Global Automotive Crankshaft Market is on a steady growth trajectory, driven by technological advancements and increasing consumer demands for fuel-efficient and high-performance vehicles. While challenges from the rise of electric vehicles loom, the market's long-term prospects remain positive, especially in emerging economies. Manufacturers must focus.

About Us

Dimension Market Research (DMR) is the ultimate one step solution to all your research needs and requirements. Dimension Market Research is India and US based company, we have headquarter in USA (New York) with offices in Asia pacific region. Dimension Market Research is specifically designed to provide most relevant syndicated, customized and tailor made market research to suit your specific business needs.