Office furniture is closely related to people's lives, affecting people's quality of life and physical health. Therefore, it is best to remind the public to make a good knowledge reserve before purchasing furniture, and learn some tips for identifying and various furniture. Here, I have collected 10 tips,
1.If the furniture material reasonable?
Different office furniture, the materials of the surface are different, such as legs of tables, chairs, cabinets require hardwood and it is relatively strong, can bear the weight, while the internal materials can be used other materials and the thickness of the table requires 2.5 cm, If it is too thick looks awkward while too thin it is easy to be bend and deform;The cabinet of the bathroom can not be made of fiberboard, but the moisture-proof board should be used, because the fiberboard will be expanded and damaged when exposed to water.
It was found that if the wood had insect holes and foamed, indicating that the drying was not complete. Check the surface and also open the door,and you also need to check the inside of the drawer if the material is rotten or no. you can use your nails to smash it, and when you break it in, it means that the material is decaying. After opening the door, smelingl it with your nose. If it is squirting, glaring, and tearing, it means that the formaldehyde content in the glue is too high and it will be harmful to the people.
2.Whether the wood moisture content is exceeded 12?
The moisture content of office furniture can not be exceeded to 12%, if the water content is high, and the wood is easy to be warp and deform. When consumer choose the furniture , there is no test instrument. You can take the method of hand touch and touch the bottom of the furniture or the place where there is no paint inside. If you feel wet, then moisture content is at least 50%, which cannot be used at all. Another way is to sprinkle a little water on the unpainted wood. If the sputum is slow or even not it can also means that the moisture content is too high.
3. If the furniture structure strong?
When you purchasing the small pieces of furniture like chairs you can drag on the concrete floor or picking gently falling ,if the sound is crisp that indicating it is in the good quality,if the sound is dumb there is a murmur that indicating that the parts are combined not tight and also the structure is not strong .
The desk can be shaken by hand and to check if it is stable for no .while for the sofa you have to seat for a while if it shake or murmur by your moving that means the sofa is not in high quality and you willnot keep it for a long time.
Regarding the legs of square tables or chairs there should be four triangular clips to fix the legs,When you choose, you can look over the table and chair. The cloth chair can be touched by hand.
4. If the four feet of the furniture is flat?
For this important point you can just put the table on the flat floor and shake then you will get the answer,For some of the furniture there is only three legs on the ground,then in this time you have to check if the surface is straight or no ,and it can not bow back or collapse the waist and the table top is raised,once we put the glass top it will be rotated,the table is recessed and also the glass top is easy to be broken .Pay attention to the inspection of the cabinet door. The slit of the drawer should not be too large. And also it should be straight , and the door should not sag.
5.Whether the veneer furniture is strict for the patchwork?
Whether it is wood veneer, PVC or pre-painted paper, it is necessary to pay attention to whether the leather is flat, with or without bulging, foaming, and cracking. When you check you have to look at the light if not you can not recognize,The ash veneer furniture is relatively easy to be damaged and generally it can be used for two years,In the case of the wood veneers,planing veneers are better than the rotary cut veneers.The way to identify the two is look at the pattern and texture on the wood,,The wood texture of the cut veneer is straight and dense while the veneer texture of the rotary cut is curved and sparse,.Regarding for the particleboard veneer furniture the ground parts must be edged ,if not it will absorb the moisture that your furniture will be swell and damage.Generally, the corners of the veneer furniture are easy to be tilted up. When picking, you can buckle the corners by hand. If it is easy for you to buckle it up, it means there is a problem with the glue.
6.Whether the furniture edge is flat?
As we know if the edge is not flat, indicating that the inner material is wet, and the seal will fall off in a few days. The edge banding should also be rounded and not straight angles. The edges sealed with wood strips tend to get wet or crack. The furniture inlaid with the plywood is nailed with nails. It is necessary to pay attention to whether the nails are flat and whether the color of the nails is consistent with other places. Usually the nail hole is sealed with putty and also you need to pay attention to whether the putty is bulging. If it is bulged, it will not work for a long time and the putty will fall out from the inside.
7.Whether the painted part is smooth?
The paint part of the furniture should be smooth and flat, not sloppy, wrinkle-free, and flawless. The corners are not straight at right angles, and the straight edges are easy to be slagged and painted. There also should be painted inside of the furniture door , without the paint board being easy to be bended and affect the esthetic.
8.Whether the spare parts are reasonable?
For example, check the door lock switch whether is working; the big cabinet should be equipped with three hinges,but some of the hinges can only be installed with two; Some of it need three screws but some of the manufacture save the material only provide one and after long time use it will be easy to be damaged.
9.Whether the spring and the sponge is in good quality?
When choosing the sofa or sofa bed you need to be attention if the surface of the sofa is flat,It can not be waved,softness and hardness should be uniform,And the softness and hardness which should be moderate can not be exceed.,
The method of selection is to sit down and squat with your hand, and how about the flatness,?and how does the spring working.?And how about the layout of the spring?, If the spring to bite the spring, it will make a sound. Secondly, You should pay attention to whether the quilting has broken wires, jumpers, and how about the density of the corner pin also?
10.Whether the color is coordinated with the interior decoration？
I believe that some of the offices in the current office are equipped with wooden or marble floors, while others use fabric flooring, Here are some ways to get some inspiration from you. If you want a stylish office, we can consider the eucalyptus floor with a white series of sofas and red and blue casual office furniture and white series of office furniture will create a very stylish office, some people think the collocation is too complicated and too messy for these colors, but in fact, we will find that the fashion of the office has a warm atmosphere and can enhance the brightness in our office and the atmosphere in the office
Secondly, if we want to match the classic office, we should follow the traditional point of view. It is good to use dark floor with black or white and brown office furniture. Generally, this kind of match is suitable for the office of our boss or president. But you must remember that the color of the floor and the color of the office furniture can not be the same, which will result in a more depressing environment. If you choose white office furniture, it is very ok, black and white have always been very fashionable but We can't create a classic atmosphere, so we'd better choose dark floor and brown office furniture to make our office looks to be classic.
Last but not least I hope the above 10 tips will be useful for you .and we will chitinous to provide more useful information for you .
If you have any inquiry or interest you can visit our website at www.urfurniture.com or send to me by email at urfurnitureuae1@gmail.com Contact :Ann Liu
Mobile:971 55 920 0886