HP is a well-known name when it comes to gadgets. Its printers are one of the most popular products among users because of its versatility and reliability. It has a quick setup guide, and it prints in fast speed with highly durable, scratch-resistant inks. However, sometimes users can face issues with the HP printers as well. Due to which we present you the troubleshooting guide for the printer having trouble printing colored. For more information regarding hp printer printing wrong colors connect with us
HP Printer Not Printing Color
You may not be able to print the color on the HP printer due to some settings issues. Here are some of the setting problems that your system may have that can cause trouble with the color cartridge.
Make sure that the page you are going to print out should not be set to greyscale as it will print only black and white.
Set the settings to default while printing color.
There are chances that the color cartridge is empty or dried due to which it may not print color.
If the ink cartridge is not clean, then it may face problems in running its feature. You may have to try cleaning and filling it to fix this issue.
Sometimes the cartridge is faulty, that’s why it may not function its tasks properly, you may have to replace it with a new one.
The following are the methods to clear the issue printing in the HP printer.
Method 1: Uninstall and reinstall the hp printer assistant software from the device list and reinstall it from the HP website. If reinstalling fixes your issue, then no need to go further with the troubleshooting guide.
Method 2: If the quality of the ink cartridge is not up to the mark, then there are chances that it may end up being unreliable, so use only genuine HP ink. Visit HP anti-counterfeit site to find an authentic ink cartridge range and purchase them from the online HP store.
Method 3: Check the factors like paper quality, paper type, and paper size from print settings and set according to your print job.
Method 4: If the ink is low in the color cartridge, then also HP printers may not print colors. You can find the ink levels of the HP printer from the Ink icon on the control panel.
Method 5: If the ink level is low/empty, then change ink cartridges by following the below steps.
Switch on your printer and load the printer with white paper.
Access the ink cartridge bar by gripping each side of the handle and slowly raising it.
Take the next step when carriage to go idle, which has now relocated to the center of the printer.
Now remove the ink cartridge from the slot and make sure that your finger touches only the black plastic on the ink cartridge. You have to lift the lid and push it back and then pull the ink cartridge to remove it successfully.
Cautiously remove the plastic tape from the ink cartridge without contacting the copper-colored or contacts, ink nozzles, or protective tape on the contacts.
Now, you need to slide the ink cartridge into the slot by holding it through its surfaces by keeping nozzle outlets near the printer.
After inserting the ink cartridge, close the ink cartridge lid to secure it into place.
You can replace the ink cartridge by following these steps as well to solve this issue.
Method 6: You can print the Quality Diagnostic Report to evaluate the results by Visiting these options from the control panel, Setup> Tools> Print Quality Report. If the color block shows the white line, then clean the ink cartridge. Otherwise, you need to check the alignment lines.
You can take these steps to clean the ink cartridge.
Click on the Setup option from the printer control panel and then open tools.
Now tap the Clean Cartridges option.
You can move on to the next level of the cleaning based on the Print Quality report.
These are the steps to review the alignment lines and green color blocks to find defects.
If there are no dark lines or white gaps in the green color block in the Print Quality Diagnostic report, then you have to take these procedures.
Keep the quality of the image to high resolution.
Avoid leaving the ink cartridges out unprotected and always switch off the HP printer after the use to protect them from drying.
Go to Setup from the control panel and then tools and choose Align Printer for advanced alignment troubleshooting.
HP Printer Not Printing Color Correctly
You can take these steps if your printer appropriately and having issues in ink consistency, alignment, or ink smears.
Method1: You can start by reinstalling the printer driver by performing the above steps. If your issue persists, modify the print settings suitable for the print job.
Method 2: Use genuine HP ink cartridges or toner supplies and suitable paper for the print task. Replace the ink cartridge if it is faulty or non-authentic by performing the change in ink cartridges steps above.
Method 3: You can resolve the ink smears issue from the control panel settings. Open Setup> Tools and click the Clean Page Smears option. This step can solve the problem and make the print quality acceptable.
Method 4: You can manually clean the ink cartridges and ink nozzles using a soft cloth to fix the issue of smeared text or track marks.
Use manual cleaning only if you see these issues. Otherwise, avoid it and be careful while performing the cleaning steps as you do not want to break any part of the printer.
You can see the procedure of removing the ink cartridge from the previous ink toner replacement guide and keeping in mind only cleaning the area around the ink nozzle.
For more information regarding hp printer not printing color correctly connect with us- 1855-788-2810