Channel nuts are one of the main components of our strut system. It is designed to provide essential gripping power and ease during installation. Channel nuts are press formed, machined and hardened from steel which meets the requirements of ASTM A108 or ASTM A36 for our larger sizes. Channel nuts are commonly referred to as Strut Nuts, Stud Nuts, Spring Nuts, Plain Nuts, Topnuts, Channel Nuts, Kwik Strut etc
Channel nuts are one of the main components of our strut system. It is designed to provide essential gripping power and ease during installation. Channel nuts are press formed, machined and hardened from steel which meets the requirements of ASTM A108 or ASTM A36 for our larger sizes. Channel nuts are commonly referred to as Strut Nuts, Stud Nuts, Spring Nuts, Plain Nuts, Topnuts, Channel Nuts, Kwik Strut etc
The Sag Rod is completely different from the Turnbuckle Rod or Clevis Rod. It usually requires pass through of the members it supports. This pass through allows take-up to be achieved with standard nuts and washers. There is no need for left hand thread on either end. This Custom Component creates a sag rod between 2 girts. It also cuts holes in the 2 girts. There are 2 options to control the sizes of the nuts and washers. The first option sizes the nut and washer profiles based on the diameter of the rod diameter.
Kapson India carries a broad range of threaded rod inventory fit for a wide range of applications across the Strut Support Systems, plumbing, electrical, HVAC and other industry applications.
Kapson India offers Threaded Rods which are ranging from 6mm to 12mm for hanging cable tray system. We also offer the rods as per the customer requirements. Cable Trays are a robust and smooth solution for the routing and protection of cables in light and medium installations where a high standard threaded rods are used.
Kapson India offers Threaded Rods which are ranging from 6mm to 12mm for hanging cable tray system. We also offer the rods as per the customer requirements. Cable Trays are a robust and smooth solution for the routing and protection of cables in light and medium installations where a high standard threaded rods are used.
Kapson India carries a broad range of threaded rod inventory fit for a wide range of applications across the plumbing, electrical, HVAC and other industry applications.
Threaded rods made of galvanised steel are suitable for a wide range of applications. Available with threads M8, M10 and in lengths of 1 or 2m. They are suitable for use with channel sections, beam clamps, pipe clamps, Ductings Work or duct hangers. For Ducting work products used are Threaded Rod & Accessories consisting of flat & fender washers, hex nuts, bolts and rod couplers. Threaded Rod to create a secure system for hanging ductwork and equipment.
A Thread Rods & Thread Bars, also known as a thread stud, is a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod. Thease Threaded Bars are available in Fully Threaded form and single or double ended threaded rods. Kapson Threaded Rods are commonly used in multiple construction applications. These Threaded Rods & Bars are continuously threaded from one end to the other and are frequently referred to as fully threaded rods and a variety of other names and acronyms.
Double end threaded studs (double end stud bolts) are a type of threaded stud that is typically shorter than threaded rods and have threads on both ends. Insert them into a tapped hole and fasten them at one or both ends as needed. Items vary by thread size, length, material, system of measurement and other considerations. Single end and double end threaded rod are often bent to make specialized fasteners such as anchor bolts and u-bolts. A common type of threaded rod is all thread or fully threaded rod, where the thread extends the complete length of the rod.
