Regarding the introduction of the LaserJet Pro M102w printer, we introduce two aspects, one is the solution when the printer jams, and the other is the installation method of the hp cf219a drum unit and the hp cf217a toner cartridge installed in the printer.
How should the LaserJet Pro M102w printer jam be solved?
Driving the clutch, gears, and shaft slip can cause paper to travel abnormally, causing paper jams. If the electromagnetic clutch does not pick up, the paper roller cannot be driven to rotate. Use a multi meter to measure whether there is voltage at the input end to determine whether the clutch itself is faulty or the front end power supply is faulty. If the pickup roller rotates without feeding paper, it is necessary to check whether the paper cassette is installed in place, the paper suction roller is too dirty or oil to reduce the friction. And the paper is not fed, and it is cleaned with a damp cloth or alcohol.
The function of the separation claw is to separate the paper from the surface of the photosensitive drum. If the separation claw is damaged or the spring of the separation claw is deformed, the paper cannot be separated, causing paper jam, which is one of the common causes of paper jams in the printer. Damage to the separation claws may also damage the photosensitive drum, so it must be cleaned and inspected frequently.
Through the above analysis, we should pay more attention to regularly check the various parts of the printer, and do the cleaning, ventilation and paper selection work. Only in this way can you avoid paper jams and extend the life of the printer so that it can better serve us.
How to install hp cf217a toner cartridge chip?
First, let's get to know the printer and the chip. Pay attention to the printer model and select a dedicated chip that matches it.
Printer display: Not available, please try again later. And can't print or copy. At this point you need to replace the chip.
Press the open button on the left side of the printer to open the print cartridge compartment.
Remove the toner cartridge, use a screwdriver to open the screw in the upper right corner of the toner cartridge, remove the chip that has been exhausted, and load a new one.
Put the toner cartridge that has been replaced with the chip into the printer compartment and close the cover.
At this point, the printer status light turns green and the screen display is warming up.
When the screen displays ready to copy 100%, the chip replacement has been completed and the printing and copying functions have been resumed. The printer is ready for normal use.
- recycletoner's blog
- Log in or register to post comments