You are here

ztwesc's blog

How to Choose Bluetooth Audio Module for Audio Transmitter Solution

ztwesc's picture
Submitted by ztwesc on Mon, 10/12/2020 - 00:21

In the past decades, cables have been helping people a lot to make phone calls and play music, but it can be annoying when the cables tangled up or when you want to walk around and make phone calls. Bluetooth is a perfect alternative technology for those people who want to get rid of these annoying issues.
Arrows RC airplane
Atten soldering gun
FMS RC jet
Kerui GSM alarm

What’s the difference between Wi-Fi 6 and Wi-Fi 5

ztwesc's picture
Submitted by ztwesc on Mon, 10/12/2020 - 00:12

Wi-Fi Alliance was established in 1999. After more than 20 years of development, at the end of 2018, Wi-Fi Alliance announced that it will change the naming method of the Wi-Fi standard, and will no longer use the 802.11 electronic engineering terminology. The new generation of Wi-Fi 6 belongs to the sixth generation of wireless LAN technology. What is the difference between Wi-Fi 6 and Wi-Fi 5?

What’s the difference between WI-FI 6 and WI-FI 5?

List of Wi-Fi naming conventions:

802.11ax = Wi-Fi 6

802.11ac = Wi-Fi 5

802.11n = Wi-Fi 4

Atten ST-100 100W Soldering Station

ztwesc's picture
Submitted by ztwesc on Thu, 08/15/2019 - 08:43

● Smart recognition of working or non-working status.
● Automatic standby, shutdown with smart time setting.
● High quality silver alloy heater to achieve quicker heating-up
● Temperature locking.
● Beep alarm function available.
● Temperature read out in ℃ and ℉ FMS RC Plane
● MCU controlled temperature calibration.
● Simulate bar indicating heating up status.
● User-friendly menu enables system setting easier.
● Separate iron stand to save room and to make easier deposit.

AT980E 80W Digital & Lead-free Soldering Station

ztwesc's picture
Submitted by ztwesc on Mon, 07/01/2019 - 03:50

High performance pluggable four-core heating element;
Temperature read out in ℃ and ℉
On/Off switch on the right side of the unit.
MCU controlled temperature calibration.
Simulate bar indicating heating up status.
LCD display screen making control visualization.
User-friendly menu enables system setting easier.
Separate iron stand to save room and to make easier deposit.
Buttons(1,2,3) for pre-setting or switching frequently used temperature.
Low-voltage heater separated from power supply to keep soldering work safer.

Atten GT 8102 Soldering station

ztwesc's picture
Submitted by ztwesc on Mon, 07/01/2019 - 03:49

LCD display making parameters monitorable and system setting easier.
Pluggable design making handle and heater change easier.
Equip with vacuum suction pen, components can be extracted after desoldering.
Installed brushless fan, air volume can reach 120 l/min.
1000W high power heating core make it heating up fast to reach the specified temperature.
PID algorithm controlled temperature accurate and stable.
Support timing/manual heating mode
Password protecting function make parameter setting with permission.

GT-6200 Double Channel Rework Station for cellphon repair

ztwesc's picture
Submitted by ztwesc on Thu, 06/06/2019 - 05:22

Highly compatible features, compatible with various type of soldering tools, a machine serves several purposes.
Single channel power max support to 150W, whole machine power max support to 200W.
Two output channels can work at the same time.
Big silicone buttons operate comfortable and reliable.
All kinds of parameter data and information in the form of graphics display with its large graphic display.
Can automatically recognize the soldering tools that you connected and upload the corresponding parameters.

MS900 4 in1 Rework Station

ztwesc's picture
Submitted by ztwesc on Tue, 05/07/2019 - 09:06

Features:
●High accuracy MCU control is employed to synchronously detect whether the 3 tool channels can be used independently and synchronously without matual interference.

●Built-in vacuum generator.

●Super power.The whole machine can provide a maximum of 900W power output.

Atten AT938D 60W Digital & Lead-free Soldering Station

ztwesc's picture
Submitted by ztwesc on Mon, 03/25/2019 - 08:25

Temperature read out in ℃ and ℉
On/Off switch on the right side of the unit.
MCU controlled temperature calibration.
Simulate bar indicating heating up status.
LCD display screen making control visualization.
User-friendly menu enables system setting easier.
Separate iron stand to save room and to make easier deposit.
Buttons (1, 2, 3) for pre-setting or switching frequently used temperature.
Low-voltage heater separated from power supply to keep soldering work safer.

Pages

Subscribe to RSS - ztwesc's blog