You are here

Tongxing's blog

Evaporative Cooler Bearing Maintenance

Submitted by Tongxing on Tue, 01/19/2016 - 23:26

Oiling and inspecting your Evaporative Cooler or Swamp Cooler bearing block bearings can save you major headaches and expense. On most Coolers, oiling the bearings is a very simple job. The majority of residential and small commercial models come with a bronze bearing. There are no moving parts to these bearings as there are with ball bearings. Bronze bearings are made with a sleeve of bronze inside a steel die-cast housing. The blower shaft spins inside the bronze sleeve.

Bearing Demand in The World

Submitted by Tongxing on Tue, 01/19/2016 - 22:28

Bearing demand in the bearing housing design World(including plain bearings) is projected to expand 3.0 percent per year through 2013 to $10.6 billion. The primary factors supporting advances will be a rebound in motor vehicle production levels and continued, albeit moderating, growth in aerospace equipment and machinery shipments. In addition, as the wind energy market continues to grow, suppliers will benefit from sales of high-value, large diameter wind turbine bearings.

Conveyor pulley,roller bearing housing

Submitted by Tongxing on Mon, 10/12/2015 - 00:40

Tapered roller bearings are roller bearings with a capacity to carry large axial forces. They are in good thrust that can with stand high radial forces as well. In tapered roller bearings and punch bearing housing , inner track ring and the outer ring raceway segments and got the pin when the rollers are made of a Cone So that the conical surfaces and the bed of the shaft of the roller, when there are finally meets a common point of the main shaft bearings.

Conveyor pulley,roller bearing housing

Submitted by Tongxing on Mon, 10/12/2015 - 00:38

Tapered roller bearings are roller bearings with a capacity to carry large axial forces. They are in good thrust that can with stand high radial forces as well. In tapered roller bearings and punch bearing housing , inner track ring and the outer ring raceway segments and got the pin when the rollers are made of a Cone So that the conical surfaces and the bed of the shaft of the roller, when there are finally meets a common point of the main shaft bearings.

e cigarette pressure sensor, electret condenser microphone

Submitted by Tongxing on Wed, 08/26/2015 - 00:46

E-cigarette liquid is a mixture of two chemical components, propylene glycol and vegetable namely glycerol along with prescribed amount of nicotine that is used in the E-cigarette. E-gold cigarette Electronic Cigarettes with e cigarette pressure sensor are the replacement of the traditional tobacco cigarettes That Were not only harmful to the smokers goal aussi affected the passive smokers since it do not include the combustion of tobacco for nicotine consumption.

e cigarette pressure sensor, electret condenser microphone

Submitted by Tongxing on Wed, 08/26/2015 - 00:45

E-cigarette liquid is a mixture of two chemical components, propylene glycol and vegetable namely glycerol along with prescribed amount of nicotine that is used in the E-cigarette. E-gold cigarette Electronic Cigarettes with e cigarette pressure sensor are the replacement of the traditional tobacco cigarettes That Were not only harmful to the smokers goal aussi affected the passive smokers since it do not include the combustion of tobacco for nicotine consumption.

e cigarette pressure sensor

Submitted by Tongxing on Tue, 08/25/2015 - 01:27

A vapor cigarette is a special device and a very useful invention at the same time, which uses an advanced system of atomization. This technology produces electronic vapors of flavored nicotine with the use of an atomization fluid. There are many contradictions on the usefulness of e cigarette pressure sensor . It seems that the concept of vapor cigarette was invented 30 years ago. An initial version was used by U.S. submarines during the Cold War.

wood cutting machine

Submitted by Tongxing on Mon, 08/24/2015 - 01:02

As a young woman, maybe I am the last person you would envision cutting large pieces of metal into beautiful shapes. Despite your initial perception, I can assure you that thousands of young women like myself are seeing the value in purchasing a laser engraving machine to pay off their student loan debt. As someone who enjoys her freedom and independence, I decided a long time ago that I was not going to work for another business in my lifetime.

Subscribe to RSS - Tongxing's blog