An inductor is a passive electronic component that stores energy temporarily in a magnetic field as electric current flows through the coil of the inductor. In its most basic configuration, an inductor comprises two terminals and an insulated wire coil, either wound around air or enveloping a core material that amplifies the magnetic field. Inductors play a crucial role in managing variations in electric current within a circuit.
When an electric current passes through a conductor like copper wire, it produces a modest magnetic field around the wire. If the wire is shaped into a coil, the magnetic field intensifies significantly. When the coil is wound around a central core composed of materials such as iron, the magnetic field becomes even more potent—essentially resembling the operation of an electromagnet. The strength of the magnetic field is entirely contingent on the electric current, and any alterations in the electric current correspondingly affect the magnetic field.
Inductors utilize the interplay between electric current and the magnetic field to counterbalance fluctuations in the current's movement. As the current initiates its journey through the inductor's coil, the magnetic field undergoes expansion until reaching a state of equilibrium. Throughout this process, the coil impedes the current flow. Once the magnetic field stabilizes, the current can traverse the coil without hindrance.
Energy is stored within the magnetic field as long as the current persists in circulating through the coil. When the current ceases, the magnetic field commences its contraction, and the magnetic energy undergoes conversion back into electrical energy. This converted energy continues to course through the circuit until the magnetic field completes its collapse.
How Inductor Works?
When a wire is moved through a magnetic field, it induces the generation of current in the wire, which subsequently flows through the connected circuit. The act of moving the wire through the field requires energy, and this mechanical energy undergoes a transformation into electrical energy. This phenomenon encapsulates the fundamental operation of an electrical generator.
Upon halting the current flow through a coil, the magnetic field associated with it is compelled to dissipate. However, this dissipation cannot occur instantaneously. The magnetic field encapsulates stored energy, and this energy must be redirected. The field contracts back toward the coil, and as it moves through the wire within the coil, it elicits the same effect as moving a wire through a stationary magnetic field: the generation of current in the coil.
The induced current in the coil functions as a stabilizing force, working to maintain the current within the coil and resisting any alterations, whether they involve an increase or decrease in current. This opposition to change is a fundamental characteristic of inductors, and they are strategically employed in circuits to ensure a gradual and controlled flow of current, preventing abrupt fluctuations.
The behavior of current in an inductor can be likened to the relationship between voltage and capacitance in a capacitor. Just as it takes time to alter the voltage across a capacitor, attempting to do so initiates a surge of current initially.
Likewise, changing the current through an inductor demands time, and if this change is forced, for instance, by opening a switch, a substantial voltage is generated across the inductor. This surge in voltage is the inductor's response as it endeavors to induce the flow of current.
The induced voltages in inductors have the potential to reach high levels, posing a risk of damaging other components within the circuit. To mitigate this risk, it is common practice to connect an additional element, such as a resistor, capacitor, or often a diode, across the inductor. This supplementary component provides a designated current path and serves to absorb the induced voltage.
When a wire carrying current moves within a magnetic field, generated either by a permanent magnet or current flowing through a coil, a mechanical force is exerted on the wire. This force has the capability to perform mechanical work.
In the context of a motor, the wire moving through the magnetic field and experiencing this force is typically arranged in the form of a coil, mechanically connected to the motor's shaft. This coil behaves like an inductor; when the current is switched off (to halt the motor), the coil continues to move within the magnetic field. At this point, the motor transforms into a generator, capable of producing a substantial voltage. The resultant inductive voltage spike, if not managed, can lead to damage to components such as the circuit responsible for controlling motor current.
Inductors and inductance
In a state of continuous current flow, the inductor behaves like a regular wire, allowing the current to pass through without eliciting any reaction. However, when abrupt changes occur in the current, the inductor resists these alterations.
Due to its inherent magnetic field, an inductor consistently lags behind changes in the current. As the current undergoes variations, the magnetic field of the inductor adjusts accordingly—intensifying with an increase in current and diminishing with a decrease. These alterations in the magnetic field result in changes to the magnetic flux, inducing an electromagnetic field (EMF). This induced EMF endeavors to counteract the change in current, acting as a regulatory force. If the current experiences a decrease, the EMF strives to boost it, and if the current increases, the EMF endeavors to diminish it. This interplay illustrates the inductor's inherent tendency to resist sudden shifts in current by inducing counteracting electromagnetic forces.
The inductor's inherent resistance to changes in current is denoted as its inductance, defined as the ratio of voltage to the rate of change of current within the coil. The standard unit of inductance is the henry (H). Due to the magnitude of the henry, inductors are often measured in smaller units such as the millihenry (mH), where 1 mH equals 10^(-3) H, and the microhenry (µH), where 1 µH equals 10^(-6) H. On occasion, the nanohenry (nH) is also utilized, with 1 nH equaling 10^(-9) H.
Numerous factors influence the level of inductance in an inductor, including the number of coils, the length of the coiled wire, the core material, and the size and shape of the core. In instances where no core is present, inductance is additionally influenced by the radius of the coil. The intricate interplay of these factors contributes to the diverse range of inductor specifications and sizes available to accommodate various applications in electronic circuits.
The inductance of a coil, given a specific radius and number of turns, is influenced by the presence or absence of a solid core. Air cores, or those without solid cores, exhibit the least inductance. Dielectric materials such as wood, glass, and plastic, essentially analogous to air, also contribute minimal inductance. On the other hand, ferromagnetic substances like iron, laminated iron, and powdered iron elevate inductance, sometimes by orders of magnitude, reaching values in the thousands. Additionally, the shape of the core plays a crucial role; toroidal or donut-shaped cores offer more inductance for a given core material and number of turns compared to solenoidal or cylindrical cores.
Embedding inductors onto integrated circuit (IC) chips poses challenges but is feasible, albeit with relatively low inductance. When the use of inductors is impractical, resistors can serve as substitutes. In certain scenarios, inductance can be simulated by employing transistors, resistors, and capacitors integrated onto IC chips, providing an alternative approach to achieving the desired electrical characteristics.
Inductors play a crucial role in various applications, particularly in conjunction with capacitors. They find application in wireless communications, audio systems, and a diverse array of electronic devices. When connected in series or parallel with capacitors, inductors serve as effective filters for eliminating undesirable signals. In the realm of power supplies for electronic equipment, including computers and peripherals, large inductors are employed. In these systems, inductors contribute to the smoothing of rectified utility alternating current (AC) power, ensuring the provision of clean, battery-like direct current (DC) power. This capability enhances the stability and reliability of electronic systems, underscoring the significance of inductors in diverse technological applications.
Why Choose LvangChip?
https://www.lvangchip.com/en/aboutus.html
LvangChip is integrity-based, the pursuit of excellence, our mission is to create value for customers, solve problems for customers, with the greatest efforts to exchange for the trust of every customer. Our goal is to become the world's leading electronic components procurement service agent and distributor. We believe that only better service will become a strong enterprise, we will build a strong and professional one-stop electronic components procurement platform, with high morale to improve our platform, to provide customers with the best quality service.
Our quality management starts from the procurement process and strictly selects our reliable supply partners, only high-standard distributors who confirm our incredibly high suppliers’ standard, such as manufacturers, franchise distributors, OEMs, CMs, independent reputable distributors, can be the partner of our strict supply chain.We have our own quality inspection team, all components are shipped to the quality testing department, before entering the inventory and shipping to the final customer, it is checked and verified its origin, to ensure the quality of the product.
Related Article
Testing and Calibration of Components on Sensor Circuit Boards
Active Electronic Components - Operational Amplifiers (Op-Amps) - Digital Logic Gates
What it Filtering Capacitors