The process of lifting concrete is also referred to by the term slabjacking or mudjacking. It is the method of elevating as well as stabilizing slabs of concrete that have sunken. It involves injecting a solution comprised of cement, water and other elements in the affected areas under the concrete slab. This will cause it to increase in height, and then even out. Knowing the procedure of raising concrete can enable property owners to make informed choices regarding the repair needs of their property.
This step-bystep guide is designed to assist you comprehend the process of raising concrete.
Step 1: Identify the Problem
The initial step of the process of raising concrete is to locate the troublesome areas with the help of a professional. This is accomplished by examining the concrete slabs to see if there is evidence of cracks or sinking. A level may also be used to determine any unevenness or dips within an area of the concrete. The recognition of problematic areas will enable you to pinpoint the type of concrete that is required and also the place for injection points.
Step 2: Prepare the Site
When the problem areas are identified, the area must be prepared for the process of lifting the concrete. This usually involves cleaning the affected areas, and eliminating any loose or sloppy objects that could hinder the injection process. In addition any landscaping or structures must be shielded from any harm caused by this process of injection.
Step 3: Drill Injection Holes
Then the time has come to make holes for injecting in the areas affected by of the slabs in concrete. The holes generally measure between 1-2 inches in diameter and are placed strategically to ensure an even raising of the slab. The size and location of the injection holes will depend of the measurements and the shape of the space to be impacted.
Step 4: Inject Material
The injection hole are constructed, the pump specifically designed for this job is employed to pump concrete raising substances into the cracks below the concrete slab. The substance is generally composed of cement, water, and other components that make an extremely strong and light white foam. This foam is introduced into the holes, and then filled in the spaces, causing it to increase in height, and eventually level out.
Step 5: Patch Injection Holes
When the concrete is raised and leveled, the infiltration holes are filled with the patching of cement. The patching substance is typically applied to the concrete's surface before being smoothed out to match the concrete's surface. The patching substance will dry over time, and will eventually become a part of cement.
Step 6: Clean Up
The final stage of the process of removing concrete is cleaning this area. All debris and other materials must be cleared away and the area must be left tidy and tidy. Property owners can then continue to make use of the concrete surface.
If you observe indications of settlement or sinking on your concrete surfaces, opting to raise your concrete may be a low-cost and effective solution. Acme Concrete Acme concrete, we provide the highest quality concrete leveling and repair by means of Mudjacking. Contact us today at https://www.acmeconcreteinc.com/ to schedule an appointment and experience the benefits of our top-quality services.