Washing dishes is a routine process that accompanies housekeeping in every home. The mood, the condition of the surrounding interior items and the result of washing depend on how ergonomically the sink is built in.
When choosing and installing a sink, several important factors should be taken into account:
the sink should be spacious and easy to use,
First of all – ergonomics, and only then – design subtleties,
The sink should not make noisy sounds.
Overhead sink
When choosing a sink you should keep an eye on the material of floor waste https://avahome.pk/product-category/floor-waste/, it is worth starting from the type of furniture that forms the basis of the kitchen. In standard kitchen units, as a rule, there is a place for the sink - a base with a set of fasteners. The location of the place for the sink is thought out at the stage of creating the project of the unit - the module for the sink should be located at a distance from the side wall so as not to cause inconvenience in operation.
Also, the water supply must be designed for connection to this type of equipment. In most cases, a hole is made in the sink for the mixer; when assembled, they represent a single structure.
Less often, an overhead type of bowl with a wall-mounted mixer is used. This installation option significantly saves space and makes the workspace more convenient.
An obligatory attribute of an overhead sink is a rim that protrudes above the countertop and protects adjacent surfaces and the wall from splashes. Such rims can be of different heights and shapes. The joints of the sink with other equipment modules must be sealed to prevent water leakage into the structures.
Built-in sink
In other words, the traditional type of sink installation in a special slot in the countertop. Such designs are more common in modern kitchen interiors. Their distribution is facilitated by a large number of design and functionality options, including the presence of one or more bowls, wings, rear or side walls, additional work surfaces.
Based on the installation method, built-in sinks can be divided into three large types:
top mounted;
flush with the table top;
from below, under the table top.
Installing a sink on top of a countertop is the most common and most convenient option both during installation and during operation. It also significantly wins in terms of design - the variety of designs and materials used allows you to turn a functional element of the kitchen interior into a decorative one.
When installing from above, it is enough to cut a hole in the countertop that matches the size of the bowl contours below the edge. After installing the sink, the edge (quite wide in this type of construction) goes onto the countertop and completely covers the joint.
When installing a flush-mounted sink from a well reputed sanitary store https://avahome.pk/, it is necessary to seal the perimeter of the slot contour so that water that accidentally gets outside the bowl does not flow into the cabinet. Such sinks are most often installed on wooden and MDF countertops, so waterproofing plays a big role. When installing in stone or glass countertops, there are no such requirements for the level of sealing, but it is still necessary to isolate the space.
Flush-mounted sinks are most often used in glass or stone surfaces. When installing them, they require very high precision in preparing the mounting hole - their rim is very narrow, or does not exist at all. If you are not confident in your own skill level, it is better to use the services of a master.
If, with an upper installation of the sink, the mixer can be installed either on the sink or on the countertop or wall, then with a flush installation, the faucet cannot be installed on the sink. The choice depends on the configuration of the plumbing system and the type of mixer. In both cases, the mixer is convenient to use and replacing it does not cause any problems, as does replacing the sink itself.
The biggest difficulties are caused by installing the sink from below , under the countertop. In this case, it is completely below the countertop level, which imposes some restrictions on the use of this system - usually this option is used if there is a stone or glass countertop. As in the previous case, the mixer is mounted on the wall or countertop.