How to Seal and Finish Floor in Bangalore?

The finishing process is vital to
create a solid layer of protection and give the surface its shine. Floor
sealers are applied before the floor finish. The sealer contains smaller
polymers and penetrates deeply to fill in small cracks and pores within the floor.
These sealers are semi-permanent and have high chemical resistance. In
contrast, the finish is applied on top. These layers will give the floor its
shine and protection and are meant to be slowly worn away with normal use. With
proper floor maintenance, only the floor finish is meant to be stripped away
and reapplied to leave the sealer unaffected.Here we will discuss the needs and
steps use in floor sealing in Bangalore.Needs
and Safety GuidelinesIt will need a floor finish
applicator(such as a hard string mop or a flat mop), wet floor signs, sealer,
and floor finish.Although modern cleaning chemicals
are safer than in the past, always read and follow WHMIS and safety guidelines
and wear the appropriate personal protective equipment as called for on the
product label.Step
1: Apply Floor SealerThere are various ways that the
sealer and finish can be applied to the floor. A string mop or a flat mop can
be both used. If a bucket is used, make sure to line the bucket with the
garbage bag to prevent residue from mixing into the finish. Regardless of which
mop is used, first, soak the mop in water and then wring it out. Each fiber in
the mop can only hold a certain amount of moisture. Presoaking the mop will
ensure that less of the floor sealer or finish will be absorbed inside the mop.
Allowing more of the solution to be applied to the floor. It will help coat the
floor evenly and make it easier to clean up the mop afterward.Step
2: Apply Additional Costs of Floor SealerAfter the first coat is dry, choose
a different starting point to apply the second coat. Apply as many coats of
sealer as needed to provide a solid layer of protection for the floor. It is
indicated by an even semi-gloss appearance across the entire area and usually
takes 2 to 3 coats.Step
3: Apply Floor FinishThe same mop can be used to apply
the floor finish. Any remaining sealer will quickly be dissipated as the floor
finish is applied. Apply the finish with the same technique as the sealer. You
will want more finish in the middle where people walk. To maintain a uniform
appearance, apply your first and last coats to the edge and the other coats in
the traffic areas.ConclusionWhen we talk about floor sealing Bangalore, it is not
easy to do by own. It needs chemicals and some tough processes. Those tasks are
tough to do by own. Here is the work start of floor service companies.
Excellent Floor Care is the floor service company in Bangalore that provides
the best floor care services
at affordable prices.