You are here

Different Parts And Different Varieties Of Stainless Steel Pipes, Bolts And Flanges

Stainless steel pipes, blots and flanges are items that allow two components or elements of a pipe system to be joined/assembled and disassembled without harming any of the parts. These can be supplied as a separate or linked (welded) component from the manufacturer to a valve, compressor, accessory, or equipment, for example.
There are three methods for making stainless steel flanges:

  • The most popular is forged (ASTM A-182), which has higher mechanical performance.
  • Fused (ASTM A-351), often known as F / C, have worse mechanical performance.
  • Sheet metal machining or bars, with the exception of particular circumstances for localized flat flange machining

Steel fasteners from stainless steel fasteners manufacturers in india are employed in the connection of pipes, valves, connections, and instruments in the industry, particularly in petrochemicals, where the ability to combine quick disarmament and couplings that sustain high pressures is required. Flanged connections are commonly used in conduit, sphere, wafer, globe, check, and other valves.

Fasteners&Stainless Steel Pipe Fittings from ss 304 fasteners manufacturers in indiacan be joined in a variety of ways. Lap Joint Flanges can be welded, bolted, or have no mechanical interlocking between the fasteners and the Stainless Steel Pipe Fittings of SS 316 fasteners manufacturers in india.
Flange Components

  • Bolt Diameter
  • Fastener Types

The most common flanges designs are:

  • Welding neck flanges (WN)
  • Sliding flanges (SO - Slip-On)
  • Threaded flanges (TH - Threaded)
  • Flap flanges (LJ - Lap Joint)
  • Seat flanges for welding (SW - Socket Welding)
  • Electrical insulation for flanges
  • Brides eight

Flange for Weld Neck
Weld neck ASTM A193 Grade B8 flanges of ss hex bolt manufacturers in indiaare also known as Welding Neck Flanges. They are distinguished by a long conical neck with an end diameter equal to the size of the pipe onto which the flange is to be installed.
The flange's end is butt welded to the pipe in the same way as two pipe ends are. This characteristic provides a nearly constant area conduit with no chance of disturbance in the circulation fluids.
The long neck and smooth transition of thickness offer this type of ASTM A193 Grade B7qualities of strength that make it suited to be utilized in sectors of pipes prone to bending loads, the result of line expansions and contractions.
Flanges equipped with a welding seat
Welded seat flanges are indeed known as ASTM A193 Grade B8mand offered by stud bolt manufacturers in india. They don't have a conical head such as the WN, but the pipe passes the flange until it rests on a seat with the same internal diameter as the pipe, providing a smooth, cavity-free duct.
A fillet weld connects pipe and SW flange here between end of the pipeline and the exterior of the flange. Because this welding is of the fillet type, radiography cannot be used to inspect it; instead, the Magnetic Particles and Penetrating Inks tests are used. The Stainless Steel products of ss threaded rod manufacturers in india need minimal longitudinal area in the line to be attached.