The heat press is an essential part of the equipment for the application of many personalization techniques: transfer of images in sublimation or transfer paper, application of textile vinyl, priming and curing of a garment in direct printing, etc. You can get quality heat press machine ideas from https://bestheatpressreport.com/.
It is important to take care of your press because you will avoid problems that would affect the quality and volume of your production. Any machine out of service is a waste of time and business opportunities. It is essential to devote the necessary time to the regular maintenance and care of the press and this will result in less expense in repairs and greater profitability.
These are the measures that you must adopt for the correct maintenance of your iron.
Know your press
The proper functioning of the heat press is based on the correct setting of time, temperature and pressure, depending on the work you are going to do. And the success in the final result will depend to a great extent on the correct adjustment of these 3 variables.
It is important that you know your work team, although you have detailed instructions on these 3 parameters (time, temperature and pressure) for each technique of personalization, material, etc., you must experiment with your heat press to know if its performance exactly matches the adjustments made or perhaps you should increase or decrease slightly some value. You should always adopt the manufacturer's recommendations with some flexibility.
Does your heat press work properly?
If in spite of following the recommendations of the technique of personalization, you detect problems in the final result you will have to diagnose what the problem is:
Check the pressure: It is important to check the pressure of the press to perform a calibration if necessary. In the case of a flat press: place a piece of paper in each of the corners of the base of the press, close it and try to extract each of the 4 papers. If any of the pieces of paper come out easily this indicates that the pressure is irregular and you should contact the technical service.
Use your press on a regular basis.
Keep the top press clean and without waste, it is very important to achieve a perfect sublimation. For this reason, it is advisable to regularly clean the press with the cleaning solution for sublimation inks and thus avoid the accumulation of ink.
Make a perfect sublimate with these tips
Sublimation allows you to decorate a wide variety of items and you have to learn to optimize resources as the case may be. While each product to be treated will have its own characteristics, there are some things that are quite universal. Here are some tips that can help on almost any substrate to sublimate:
Tip 1: Each item is different, check the measurements and then try - It is easy to think that one blank or one polyester shirt is the same as another, regardless of the manufacturer, because that is not always the case. Make sure the measurements are accurate and then run a printed test before starting your sublimation process. Each product to be sublimated will react differently. That is why it is important to maintain the same conditions in the processes, the same inputs, and products, to obtain optimal and even results, especially if it is a series production.
Tip 2: Too much humidity is not good - If the room you are sublimating in is too damp, it can cause problems with your work and with the items to be sublimated. Make sure that the sublimation paper is stored in a cool, dry place. If you suspect that your paper is too wet, put it on the press (without pressing it) for a few seconds so that the moisture evaporates. You can also press the garments for 10 seconds if they are more humid than they should be. A good idea may be to use an absorbent cloth or a non-textured paper towel behind your transfer to absorbing excess moisture.
Tip 3: Do not leave the transfer (sublimation paper) applied for a long time after sublimation - This trick can be especially relevant in regard to ceramics, such as cups. The removal of the transfer quickly, it helps to prevent the ghost effect of the image and prevents the paper from sticking.
Tip 4: Make sure the pressing time is correct - If you leave the product for a few seconds you will not get a good impression, in the case of garments, you can even get a print that is washed too quickly since the ink has not had time to dye the fibers. If the product is too long could get a blur of the image on the fabric, or shadows of ceramic objects. Consult the instructions for each product you want to sublimate to make sure you are using the correct time and temperature.
- RubyE's blog
- Log in or register to post comments